| |
Command or Action
|
Purpose
|
Step 1
|
enable
Example:
Router> enable
|
Enables privileged EXEC mode.
•  Enter your password if prompted.
|
Step 2
|
configure terminal
Example:
Router# configure terminal
|
Enters global configuration mode.
|
Step 3
|
line console 0
Example:
Router(config)# line console 0
|
Configures the console line and starts the line configuration command collection mode.
|
Step 4
|
exec-timeout minutes [seconds]
Example:
Router(config-line)# exec-timeout 0 0
|
Sets the idle privileged EXEC timeout, which is the interval that the
privileged EXEC command interpreter waits until user input is detected.
• The example shows how to specify no timeout.
|
Step 5
|
end
Example:
Router(config-line)# end
|
Returns to privileged EXEC mode.
|
Step 6
|
show running-config
Example:
Router# show running-config
|
Displays the running configuration file.
• Verify that you properly configured the idle privileged EXEC timeout.
|
Step 7
|
exit
Example:
Router# exit
|
Exits privileged EXEC mode.
Note For the exec-timeout command to take effect, you must exit from the EXEC mode and login again.
|
No comments:
Post a Comment